Adding safety data to equipment

Add safety data to equipment to inform your employees of any hazardous situation that can cause bodily harm and of the precautions to take to protect themselves from these hazards. For example, you can add a precaution to turn equipment off and remove the power cord from the power outlet before performing repairs on electrical equipment. After adding the safety data, review and verify the record by clicking the Reviewed By icon. The review fields will be automatically populated after you review the record.

To add safety data to equipment:

  1. Select one of these options: .
    • Equipment > Assets
    • Equipment > Positions
    • Equipment > Systems
    • Equipment > Setup > Locations
    • Equipment > Setup > Categories
    • Equipment > Equipment Configuration > Equipment Configurations
  2. Select the equipment for which to add safety data, and then click the Safety tab.
  3. Specify this information:
    Hazard
    Specify the hazard to add to the equipment. The system automatically populates Hazard Org., Hazard Type, and the hazard description.
    Precaution
    Specify the safety measure to protect your employees from the hazard. The system automatically populates Precaution Org. and the precaution description.
    Timing
    Select the timing which is used to identify when the precaution should be taken. For example, if your employee is working with fire, you can specify the timing of pre-work to alert the employee that they should wear fire-resistant clothing before beginning the task.
    Sequence
    Specify the sequence number which is used to identify the order in which your employee should be made aware of the precaution. All precautions are important regardless of the sequence number specified.
  4. Select the Apply to Children check box to have the safety details applied to all of the child records. A safety record attached to a production line will now be visible on all equipment in that production line.
  5. Select the Delete Pending check box to delete the pending safety record during the next review.
  6. Click Submit. The system automatically populates Created By, Date Created, Updated By, Date Updated, Reviewed By, Reviewed By Name, Date Reviewed, and Review Type.