GIS installation parameters in EAM

View and set values for GIS parameters as necessary according to the following tables.

Parent topic: Modifying the GIS installation parameters in EAM

Configuration parameters

Parameter Description
GISBASEM Determines the default ESRI base map that will be used when displaying maps. The REST endpoint specified in parameter GISSERV will overlay the base map. Valid values are: Streets, Imagery, Imagery with Labels, Terrain with Labels, Topographic, Light Gray Canvas, Dark Gray Canvas, Oceans, National Geographic, and Open Streetmap.
GISBATCH Batch limit for Add and Sync GIS Webservices. Default is 1000.
GISIMGFM Image format. Acceptable values are BMP, GIF, JPG (default), PNG, and PNG24.
GISSERV The URL of the map service used to display maps in Infor EAM.
GISLRSMM Specify if a second map can be displayed in the LRS map pop-up on the work orders screen. This parameter is only used when GISMAPS <> Global. Valid values are YES or NO.
GISLRSSL Specify the LRS map segment layer name as seen at the REST endpoint specified in install parameter GISSERV. If segments are not maintained enter Not Applicable.
GISLRSWO Specify whether linear equipment or underlying segments should be returned to the work order when using the LRS map pop-up on the work order screen. Valid values are Equipment or Segments.
GISSBTCL Determines if the following temporary layers should be cleared when Select By map tool is used: sketches and Measurements.
Note: Highlights and Selections temporary layers will always be cleared. ON will clear temporary layers. OFF will not clear temporary layers.
GISSBLR Determines layers in which features will be selected when the Select By map tool is used. ON will only select features in the buffer layers chosen in the Search window. OFF will select features in all visible layers.
GISSYNCA ON - ALL linked equipment records will be synchronized during attribute synchronization. OFF - Linked equipment records which are not in sync will be synchronized during attribute synchronization.
URLGIS GIS map PDF directory. Specify http://server_name/attachments/giswo/<tenant>/. Use http://server_name/attachments/giswo/default/ if no tenant exists. This value is used when displaying and printing map attachments of the work order.

Search-related parameters

Parameter Description
GISABLC Maximum number of advanced buffer layers allowed in an advanced search. The default is 3.
GISADDR Address, or streets, layer name in the Image Service setup in the GISSERV install parameter.
GISEQUIP Default equipment layer name.
GISGEOSV Name of the geocoding service.
GISGMAXC Specify the maximum number of geocoding match candidates. The default is 100.
GISGMIN Specify the minimum geocoding score that should display in the Matching Addresses pop-up. Default is 20. Separate multiple geocoding score values with a comma. The first value listed is the score for GISSERV and subsequent entries are values for each GISGEOSV entry.
GISINTRS Specify the separator for searching for intersection addresses. The defaults are &, |, and @. Values should be separated with a space.
Note: When ArcGIS Server is being used and a geocoding process is established, this parameter is not used as this information is contained within the geocoding service described by parameter GISGEOSV. If geocoding is not being used with ArcGIS Server, this information is used when when performing searches.
GISMAPS Set to Global to display a single map in Infor EAM based on GIS installation parameters. Set to Organization to display maps based on Organization. Set to Department to display maps based on Department. Department Security must be enabled when set to Department.
GISNARAD Specify the radius, in meters, used for viewing the nearest address. The default value is 1500.
GISZOFCT Factor (%) of default extent by which the map search result will be enlarged. The default is 2.

Highlighted line parameters

Parameters Description
GISLNCOL Specify the color of the highlighted lines in the GIS map by entering an RGB color of 0 to 255.
GISLNWID Specify the width of highlighted lines in the GIS map.

Highlighted point parameters

Parameters Description
GISPTCOL Specify the color of the highlighted points in the GIS map by entering an RGB color of 0 to 255.
GISPTTYP Specify the point type. Valid values are: CIRCLE, CROSS, SQUARE, DIAMOND, or X. Default is CIRCLE.
GISPTWID Specify the width of the highlighted point used in the GIS map.

Highlighted polygon parameters

Parameters Description
GISPLYCL Specify the fill color used for highlighted polygons in the GIS map by entering an RGB color of 0 to 255.
GISPLYBC Specify the color used for the boundary of highlighted polygons in the GIS map by entering an RGB color of0 to 255.
GISPLYFT Specify the fill type of highlighted polygons in the GIS map by entering a value of HORIZONTAL, BDIAGONAL, CROSS, DIAGCROSS, FDIAGONAL or VERTICAL.
GISPLYTR Specify the transparency level of the color fill of highlighted polygons in the GIS map.
Note: If you are using ArcGIS Server, you do not need to specify a value for GISPLYTR because the ability to highlight a polygon using a transparent image is not supported.

Markup line and point parameters

Parameters Description
GISMLCOL Specify the color of the GIS markup line. The defaults are 255, 55, and 155.
GISMLWID Specify the width of the markup line. The default is 4.
GISMPCOL Specify the color of the markup point. The default is 255, 55, and 155.
GISMPTYP Specify the type of the markup point. Valid values are CIRCLE, CROSS, SQUARE, DIAMOND, or X. Default is CROSS.
GISMPWID Specify the width of the markup point. The default is 15.

Selected feature parameters

Parameters Description
GISSFCLR Specify the highlight color of selected features. The defaults are 248, 138, and 29.

Linear equipment label parameters

Parameters Description
GISDREL Specify how boundary labels for linear equipment (referred to as ‘routes’ in GIS) should be displayed. Acceptable values are L, N, and A. The default is L.

L to display boundary labels for the longest path (in the event of multiple route paths).

N to display no boundary labels.

A to display boundary labels for all paths (in the event of multiple route paths).

Text marker label parameters

Parameters Description
GISTFNTC Specify the font color of the text marker label.
GISTFNTS Specify the font style of the text marker label by entering BOLD, BOLDITALIC, ITALIC, REGULAR, OUTLINE, or UNDERLINE. The default is BOLD.
GISTFNTZ Specify the font size of the text marker label. The default is 10.
GISFONT Specify the font of the text marker label. The default is Arial.
GISTPRMD Specify the print mode for the text marker label by entering ALLUPPER, ALLLOWER, NONE, or TITLECAPS. The default is ALLUPPER.
GISTLPCL Specify the point color of the text label.
GISTLPTP Specify the point type of the text label by entering CIRCLE, STAR, CROSS, SQUARE, or TRIANGLE.
GISTLPWD Specify the width of the point used in the text label.